Panasonic DP-6010 - Manual (Page 204)

Troubleshooting
204
Communication
No dial tone 1. Check the connection of the telephone line.
2. Check the telephone line. 210
No auto answer
1. Check the connection of the telephone line.
2. Check the Reception mode setting.
3. If the Fax Parameter No. 013 (AUTO JOURNAL PRINT) is
set to "Valid" (default setting) and the machine is printing
the received document(s) from memory, which also
happens to be the 100th transaction, the machine will not
auto answer until the Transaction Journal completes
printing.
210
32
Cannot transmit or
receive An information code will be shown on the display. Refer to the
information code table to find out the trouble. 205
No Unit Operation
No unit operation To reset the machine, turn-off the Power Switch for a few
seconds then turn it on again. 13
Mode Symptom Possible Cause / Action Page