Panasonic DP-6010 - Manual (Page 192)

Customizing Your Machine
192
Fax Parameter Table
NOTE 1. The factory standard and the current settings are also shown on the Fax Parameter List
printout. To print the Fax Parameter List, see page 202.
162 TIFF Viewer Url None Selecting whether to include the URL address in the email message
body.
*English
English+
Japanese
163 Routing Header *Off Selecting whether to add the Header Print information of the Routing
Station on the top edge of each routed page.
On
164 IFax XMT Header
(Email only)
*Included Selecting whether to include the header when sending a document to an
addressee in the same Domain as specified in the Default Domain
parameter. (This is useful when using the machine to scan documents
back to your PC)
Note: When sending to a Domain other than as specified in the Default
Domain parameter, the header will be included regardless of the
selection.
Not included
170 SMTP Authentication *Invalid If you transmit to the SMTP server, user name and password are used
for authentication. Selecting "Valid" allows you to set up the user name
and password.
Valid
171 POP Before SMTP *Invalid If you transmit to the SMTP server, POP user name and POP password
are used for authentication.
Valid
172 Direct IFax XMT *Invalid Selecting whether to be prompted during Address Book registration if
the station you are programming is to receive Internet Fax directly
without going through a Mail Server.
Valid
173 Delivery Notice Off Setting the home position of whether to request a Message Disposition
Notification (MDN) for a delivery processing confirmation indicating that
the message (email) was read, when sending an email/Internet Fax.
This setting will be the default value for the
.
*On
174 APOP Authentication *Invalid This parameter allows you to encrypt the protocol for the POP password
security when connecting with the POP server.
Valid
* = Factory default setting
No. Parameter Setting Comments
MODE SETTING SELECT MODE