Panasonic DP-6010 - Manual (Page 171)

Relayed Transmission
171
Inter
n
et Fax
F
eat
u
re
s
When you use Relayed Transmission, relay station will send the following two reports to help you check and
keep track of your faxes.
1. Relay XMT Report (COMM. JOURNAL)
When the relay station finishes transmitting to the End Receiving Station, it will send a Comm. Journal to
you when the Fax Parameter No. 143 is set to "Always" or "Inc. only", this tells you whether the
transmission was successful or not.
2. Transmission Journal
When the Relay Station receives instructions for a relayed transmission, a notification is emailed to the
registered manager (see "Setting up Your machine as an Internet Relay Station" on page 161).
Sample Relay XMT Report (COMM. JOURNAL)
Explanation of Contents
NOTE 1. If you transmit through more than one Relay Station, you will receive a separate Result Report.
Printouts and Reports
************** -COMM. JOURNAL - ***************** DATE AUG-15-2002 **** TIME 15:00 ********
(1) (2) (3)
MODE = RELAYED TRANSMISSION START=AUG-15 15:00 END=AUG-15 15:00
FILE NO.= 050 (4)
(5) (6) (7) (8) (9) (10)
STN COMM. ADDRESS STATION NAME/EMAIL ADDRESS/TELEPHONE NO. PAGES DURATION
NO. BOOK
001 R-OK STOCKHOLM 001/001 00:00:15
002 R-OK ROME 001/001 00:00:15
- PANASONIC -
*************************************** - HEAD OFFICE - ****** - 201 555 1212 - *******
(1) Indication of communication mode
(2) Start time of communication
(3) End time of communication
(4) File number : 001 to 999
(5) Sequential number of the stations
(6) Communication result : "R-OK" indicates that the Relayed XMT Request was successful.
"3-digit Info Code" (see page 205) indicates that the communication has
failed.
(7) Key Name
(8) Telephone Number, Email Address or
Station Name of the end receiving
station
(9) Number of pages transmitted : 3-digit number represents the number of pages successfully transmitted.
(10) Duration of Communication