Customizing your machine, Fax parameter table – Panasonic DP-6010 User Manual
Page 189

Customizing Your Machine
189
Fax Parameter Table
S
e
tt
ing Y
o
u
r
Mac
h
in
e
024
Print Reduction
Fixed
Selecting print reduction mode.
Fixed : Reduce received document according to setting of Parameter
No. 25.
Auto : Automatically determines and reduces the incoming document
to print onto the paper loaded in the machine.
*Auto
025
Reduction Ratio
70%
Selecting the fixed print reduction ratio from 70% to 100%. This
parameter functions only when the fixed print reduction is selected on
Fax Parameter No. 24.
----
100%
026
Polling Password
(----)
Setting a 4-digit password for secured polling. (See page 46)
027
Polled File Save
*Invalid
Selecting whether the machine retains the polled document in memory
even after the document is polled once.
Valid
028
Stamp at MEM. XMT
Invalid
Selecting whether the machine stamps the original documents when
storing the documents into memory.
(Depends on the Stamp setting on the Control Panel)
*Valid
031
Incomplete File Save
*Invalid
Selecting whether the machine retains the document in memory if the
document is not successfully transmitted.
Valid
033
XMT
Reduction
Invalid
Selecting whether the machine performs reduction when the
transmitting original is wider than the recording paper used at the
receiving machine.
*Valid
037
Receive to Memory
(----)
Enter a 4-digit password for printing the received document(s) in
memory by using
.
When
is set to ON, this parameter is not
selectable on the LCD display. (See page 83)
039
PIN Code Access
*None
Selecting the access method (Prefix or Suffix) to dial a number with PIN
Code. (See page 87)
Suffix
Prefix
042
Conf. File Save
*Invalid
Selecting whether the machine saves the confidential polled file even
after the file is polled once.
Valid
043
Password-transmit
*Off
Setting a 4-digit XMT-Password and selecting whether the machine
performs and checks the XMT-Password of the receiving station when
transmitting. (See page 77)
On
044
Password-receive
*Off
Setting a 4-digit RCV-Password and selecting whether the machine
performs and checks the RCV-Password of the transmitting station
when receiving. (See page 79)
On
046
Select Receive
*Invalid
Selecting whether the machine performs selective reception. (See page
91)
Valid
052
Diagnostic Password
(----)
Setting the password for Remote Diagnostic Mode. Please ask your
Panasonic Authorized Dealer for details.
053
Sub Address Password
(----)
Setting a 20-digit password for secured sub-address communication.
054
Fax Forward
*Invalid
Selecting whether the machine performs Fax Forwarding to the
specified destination.
Valid
* = Factory default setting
No.
Parameter
Setting
Comments
MODE SETTING
SELECT MODE
RECEIVE TO MEMORY
RECEIVE TO MEMORY