Activate aux command, Aux time, Edit schedule – Pelco SPECTRA C3412M-D User Manual
Page 62: Activate aux command aux time edit schedule

62
C3412M-D (12/08)
ACTIVATE AUX COMMAND
(Applies only to 23X and 35X models.)
Motion detection can be programmed to trigger an auxiliary command when motion is detected.
The following are the settings for ACTIVATE AUX:
OFF (default): Motion detection will not trigger an AUX command.
1: Triggers a command to AUX 1.
2: Triggers a command to AUX 2.
AUX TIME
(Applies only to 23X and 35X models.)
Aux time is the length of time the auxiliary will remain on after motion is detected. Available
settings for AUX TIME are 1–60 seconds.
EDIT SCHEDULE
The Edit Schedule menu is a duplicate of the Edit Event menu (refer to Event on page 80) with
the following exceptions. In the Edit Schedule menu, the event type cannot be changed. Also,
the Holiday feature cannot be accessed from the Edit Schedule menu.
For instructions on changing the features in the Edit Schedule menu, refer to Edit Event on
page 83.
EXIT
SPECTRA IV
LANGUAGE
ACK ALERT*
RESET CAMERA
CYCLE CAMERA POWER
REBOOT SYSTEM
BACK
EXIT
DOME SETTINGS
BACK
EXIT
MOTION DETECTION ENABLED
ACTIVATE AUX
AUX TIME (SECS)
MOTION DETECTION
PRESET NUMBER
* * * PRESET NOT DEFINED * * *
BACK
EXIT
REFERENCE INFORMATION
AZIMUTH
ELEVATION
ZOOM
RATIO
CUSTOM CAMERA SETTINGS
PRESETS
* This setting applies only to Pressurized Spectra IV dome systems.