Auto sharpness, Auto white balance, Auto sharpness auto white balance – Pelco SPECTRA C3412M-D User Manual
Page 44
![background image](/manuals/184514/44/background.png)
44
C3412M-D (12/08)
AUTO SHARPNESS
Auto sharpness enhances picture detail by increasing the aperture gain of the camera and
sharpening the edges in the picture.
There are two settings:
ON (default): The camera automatically maintains a normal sharpness mode.
OFF: The sharpness of the picture is set manually by programming the sharpness level.
Sharpness level settings range from 0–63.
AUTO WHITE BALANCE
This feature automatically processes the viewed image to retain color balance over a color
temperature range. The default setting for auto white balance is ON.
R GAIN: Adjusts the picture output in the red range. As you change the value, you will see the
color change on your monitor.
B GAIN: Adjusts the picture output in the blue range. As you change the value, you will see the
color change on your monitor.
EXIT
SPECTRA IV
LANGUAGE
ACK ALERT*
RESET CAMERA
CYCLE CAMERA POWER
REBOOT SYSTEM
BACK
EXIT
DOME SETTINGS
TYPE OF LIGHTING
AUTO FOCUS
SURE
FOCUS
ZOOM LIMIT
ZOOM SPEED
LOW LIGHT LIMIT
IR CUT FILTER
LOW LIGHT FOCUS
AUTO IR LEVEL
BACK
EXIT
CAMERA
BACK
EXIT
ADVANCED SETTINGS
SHUTTER SPEED
AGC LIMIT
AUTO IRIS
AUTO IRIS LEVEL
AUTO IRIS PEAK
AUTO SHARPNESS
SHARPNESS LEVEL
AUTO WHITE BALANCE
R GAIN
B GAIN
BACKLIGHT COMP
VIDEO LEVEL
SENSOR SCAN MODE
FIELD ALIGN
E. IMAGE STABILIZER
IMAGE ENHANCEMENT
LOW LUX NOISE REDUCTION
WIDE DYNAMIC RANGE
* This setting applies only to Pressurized Spectra IV dome systems.