Pelco SPECTRA C3412M-D - Manual (Page 57)

C3412M-D (12/08) 57
PRESETS
The model of the back box you are using limits the number of programmable presets that can be stored and retrieved in the
back box memory. If you are using an older model back box, you may program and use up to the maximum number of
presets available to the dome drive. However, if the dome drive is changed, the back box model will limit the number of
stored presets available to the new dome drive. Refer to the table below for more information.
The Spectra IV dome system, which includes 16X and 18X models, has 128 preset positions. The programmable presets
are numbered 1–32, 35–82, and 100–150.
The Spectra IV SE dome system, which includes 22X, 23X, and 35X models, has 256 preset positions. The programmable
presets are numbered 1–32, 35–82, and 100–256.
Note: The number of available presets may be limited by the head-ins, controllers, and DVRs that are connected to your
dome system.
Each of the user-definable presets can be programmed to use pan, tilt, camera settings, and motion detection.
The following presets are predefined for specific functions:
Preset Action
33: Flip command. Pans the dome drive 180 degrees.
34: Pan zero command. Directs the dome drive to the factory-determined zero reference point.
83–87: Reserved.
88: IR filter IN (color).
89: IR filter OUT (black-white).
90–91: Manual limit stops.
92–93: Scan limit stops.
94: Reserved.
95: Select main programming menu.
96: Stop a scan.
97: Random scanning.
98: Frame scanning.
99: Start auto scanning
Back Box Series Model Number of Stored Presets
Spectra Spectra SE
Spectra III BB53 99 15
Spectra IV BB4 128 256