Paradyne 3821PLUS User Manual

Page 40

SDCP Menus

3-17

3821-A2-GB20-30

February 1998

Scroll to and select the Misc configuration options

group.

Edit StrapGroup

Test Misc

StrapsWhenDisc >
Nxt No_Change

Select Nxt until RemAccssPasswrd appears.

RemAccssPasswrd
Nxt

ąĄ°00000000

Select the F2 (

°) key to increment password values.

RemAccssPasswrd
Nxt

ąĄ°00000000

Press the

key to move the cursor to the next

position.

RemAccssPasswrd
Nxt

ąĄ°12345678

Continue this sequence until you have entered the

new password value.

To save the new password to a configuration area,

make the following selections.

RemAccssPasswrd
Nxt

ąĄ°12345678

Press the

key to scroll up (twice).

Choose Function
Edit Save

Select Save.

Sav EditArea to >
Active (Saved)

Select a configuration area (Active (Saved),

Customer 1, or Customer 2) by using the

key. Press

F1 or F2 to save the changes.

Select the

key to exit to the Top-Level menu or

select the

key to remain in the Configure branch.

When using the SDCP to edit configuration options,

keep the following in mind:

•

Nxt has two functions. First, it indicates that more
configuration options are available within that
group. These are accessed by selecting Nxt
(pressing F1) and scrolling down to the next
configuration option. Second, it indicates that
what is displayed on the LCD is the current
setting. If you scroll left or right, Nxt disappears
and reappears if a new value is selected.

•

End appears when you have scrolled down to the
last configuration option available in that group.
Selecting End returns you to the top of the
configuration group. You are free to enter that
group again or scroll left or right to the next
configuration options group.

•

The

key takes you one step up in the

Configure branch each time it is pressed.