Menu structure – Paradyne 3821PLUS User Manual
Page 25
COMSPHERE 3821Plus Modem
3-2
February 1998
3821-A2-GB20-30
Menu Structure
An elaborate menu of options is available from a
Shared Diagnostic Control Panel (SDCP).
The menu tree is a hierarchical structure used to
display functions that configure and control local and
remote 3821Plus modems. It is accessed via the SDCP
and is shown in its entirety in
The menu tree contains the following branches:
Modem Select
Used to select one of the three
modems on the card. The
modem shown in uppercase
characters is the modem
connected to the SDCP.
Quick
Configuration
Display
This hidden menu item
displays information about the
modem’s configuration, such
as line mode and rate.
Call Setup
Used to dial, disconnect, and
answer telephone calls as well
as store up to 10 telephone
numbers in directory locations.
Status
Used to monitor the current
status of the VF line and DTE
interface as well as view the
identity of the modem.
Test
Used to begin and end various
modem tests.
Configure
Used to change and save the
modem’s configuration
options.
Control
Used to control the modem’s
hardware and software
functions.
Remote
Used to access and control a
remote 3800Plus modem. See
Chapter 6,
Security
Used to control the modem’s
dial access security. See
Chapter 7,
495-14520-01
Call_Setup
Control
Test
Security
Configure
Remote
Status
(Modem Status)
MDMA mdmb mdmc