Result codes, Overview, Appendix b – Paradyne 3821PLUS User Manual
Page 118: Lists result codes produced by the modem, Result codes listed in, Lists all available result codes with, Table b-1, For a list of result codes
B-1
3821-A2-GB20-30
February 1998
Result Codes
B-1
Overview
lists all the result codes 3821Plus modems
may send to the DTE. Result codes can be numeric or
verbal, terse or extended. See the Qn, Vn, and
Xn commands in
Table B-1
(1 of 3)
Result Codes
Numbers (1)
Numbers (2)
Word
Description
0
0
OK
Command executed
1
1
CONNECT
Modem connected to line
2
2
RING
Modem receiving a ring voltage from the VF line
3
3
NO CARRIER
Modem lost or does not detect carrier signal, or
does not detect answer tone
4
4
ERROR
Invalid command
5
5
CONNECT 1200*
Connection at 1200 bps
6
6
NO DIALTONE*
No dial tone detected
7
7
BUSY*
Busy or trunk busy signal detected
8
8
NO ANSWER*
No ‘‘quiet” answer (@)
10
10
CONNECT 2400*
Connection at 2400 bps
11
11
CONNECT 4800*
Connection at 4800 bps
12
12
CONNECT 9600*
Connection at 9600 bps
13
16
CONNECT 12000*
Connection at 12,000 bps
14
13
CONNECT 14400*
Connection at 14,400 bps
*Appears when the Extended Result Codes configuration option is enabled.
**Appears when the Extended Result Codes configuration option is set for Use_DTE_Rate. This displays the DTE data
rate instead of the line rate.
B