Philips DIGA DMR-BW750 - Manual (Page 90)

90
RQT9428
Rec for High Speed Copy
You can copy recorded titles from the HDD to DVD-R, DVD-R
DL, DVD-RW (DVD-Video format), +R, +R DL and +RW using
high speed mode. However, screen size, etc. is restricted
( ➡ below).
We recommend turning the setting “Off” if high speed copy to
DVD-R, etc. is not necessary when recording a programme.
This setting is valid for the following cases:
– Recording TV programmes in XP, SP, LP, EP or FR modes
– Recording from an external equipment (including DV
equipment)
– Copying from a fi nalised DVD-Video disc.
[On] You can high-speed copy to DVD-R, etc. Press
[w, q] to select “Yes” and press [OK].
The following restrictions are applied to
recorded titles.
– Recordings are made using the aspect ratio
set in “Aspect for Recording” ( ➡ 89).
– Select the type of audio in advance from
“Bilingual Audio Selection” ( ➡ right).
– You are no longer able to switch the audio
when watching a programme on an input
channel on the TV connected to this unit.
[Off]
Note
Titles recorded in XP, SP, LP, EP, FR mode on HDD cannot be
copied to BD-RE or BD-R using high speed mode, regardless of
the above setting.
BD/DVD Speed for High Speed Copy
Select the speed of high-speed copying (When using high-speed
copy compatible discs).
[Maximum]
[Normal (Silent)]
The noise generated by this unit is less
than when “Maximum” is selected,
however the time required for copying will
double (approximately).
HDD Management
Press and hold [OK] for 3 seconds to show the following
settings.
Delete all titles
Delete all titles in HDD.
Delete does not work if one or more titles are protected.
Format HDD
Format of the HDD is performed.
Picture
(All factory default settings are indicated with underlined text.)
Still Mode
Select the type of picture shown when you pause play ( ➡ 118,
Frames and fi elds).
[Automatic]
[Field]
Select if jittering occurs when “Automatic” is
selected. (The picture is coarser.)
[Frame] Select if small text or fi ne patterns cannot be seen
clearly when “Automatic” is selected. (The picture
is clearer and fi ner.)
Seamless Play
Select the play mode between playlist chapter segments and
partially deleted titles.
It is not valid for titles in DR mode or AVCHD videos.
[On] The chapters in playlists are played seamlessly.
This does not work when there are several audio
types included on the playlist and when using
Quick View (PLAY×1.3). Additionally, the
positioning of chapter segments may change
slightly.
Additionally, the positioning of chapter segments
may change slightly.
[Off] The points where chapters in playlists change are
played accurately, but the picture may freeze for a
moment.
NTSC Video Output
Select how the NTSC image is output.
[NTSC]
Output as NTSC.
[PAL60] Convert and output as PAL60. Select this when
connected to the PAL format TV.
Sound
(All factory default settings are indicated with underlined text.)
Dynamic Range Compression
BD-V DVD-V
Change the dynamic range for late night viewing.
[On]
[Off] [Automatic]
Downmix
Switch the downmix system for playing back multi-channel
surround sound.
When “Dolby D/Dolby D +/Dolby TrueHD” or “DTS/DTS-HD” or
“MPEG” is set to “Bitstream”, there are no downmix effects for
the audio output.
The audio output will be in “stereo” in the following cases.
– AVCHD playback
– Playback of clicking sound on the menu and audio with
secondary video in picture-in-picture mode
[Stereo] When connected to equipment that does
not support the virtual surround function
[Surround encoded] When connected to equipment that
supports the virtual surround function
Bilingual Audio Selection
(Only when recording from DV input)
Select whether to record the main or secondary audio type when:
Copying to a DVD-R, DVD-RW (DVD-Video format), +R and
+RW.
“Rec for High Speed Copy” is enabled. ( ➡ left)
Recording sound in LPCM ( ➡ 91, “Audio Mode for XP
Recording”).
[M 1] [M 2]
You cannot select the audio on this unit when recording from an
external source, such as when copying from a video cassette
recorder (except from DV equipment connected to this unit’s DV
input terminal). Select the audio on the other equipment.
When recording from the unit’s DV terminal, select the type of
audio recording from “Audio Mode for DV Input” ( ➡ 91).
Digital Audio Output
Press [OK] to show the following settings.
Changing the unit’s settings
DMR-BW850GL_en.indb 90 DMR-BW850GL_en.indb 90 2009/04/08 午前 10:01:27 2009/04/08 午前 10:01:27