Philips DIGA DMR-BW750 - Manual (Page 57)

57
RQT9428
With Other Equipment
Recording broadcasts from external equipment
HDD
See also “Important notes for recording” (➡ 28)
e.g., Connecting to the AV2 terminals on the front
Turn off the unit and external equipment before connecting.
L/MONO - AUDIO- R VIDEO S VIDEO
AV2 IN
Connect to Audio/Video output terminals.
External equipment
Audio/Video
cable
S Video
cable
This unit
The S VIDEO terminal achieves a more vivid picture than the
VIDEO terminal.
Preparation
Press [DRIVE SELECT] to select the HDD drive.
When the output signal from the external equipment is NTSC,
change “TV System” to “NTSC” in the Setup menu ( ➡ 92).
1
While stopped
Press [INPUT SELECT] to select the
input channel for the equipment you
have connected.
e.g., If you have connected to AV2 input terminals, select
“AV2”.
2
Press [REC MODE] to select the
recording mode.
DR, HG, HX, HE, HL, FR mode cannot be selected.
3
Select the channel on the other
equipment.
4
Press [* REC].
Recording starts.
To skip unwanted parts
Press [h] to pause recording. (Press again to restart recording.)
To stop recording
Press [g].
Cop
ying
DMR-BW850GL_en.indb 57 DMR-BW850GL_en.indb 57 2009/04/08 午前 10:01:07 2009/04/08 午前 10:01:07