beautypg.com

Copying from a video cassette recorder, Manual recording, Press [rec mode] to select the recording mode – Philips DIGA DMR-BW750 User Manual

Page 58: Start play on the other equipment, Press [ * rec

background image

58

RQT9428

Copying from a video cassette recorder

e.g., Connecting to the AV2 or DV input terminals on the front

Turn off the unit and other video equipment before connecting.

DV IN

L/MONO - AUDIO- R

VIDEO

S VIDEO

AV2 IN

Connect to Audio/Video output terminals.

Other video equipment

DV cable

(IEEE 1394, 4-pin)

S Video

cable

Audio/Video

cable

This unit

If the audio output of the other equipment is monaural

Connect to L/MONO on the AV2 input terminals at the front.

The S VIDEO terminal achieves a more vivid picture than the

VIDEO terminal.

When recording from the unit’s DV terminal

Use only DV cable with ferrite core.

Select the type of audio recording from “Audio Mode for DV Input”

in the Setup menu (

➡ 91).

When recording from DV equipment (e.g., digital video

camcorder), you can record audio/video recordings from DV tape

only.

When “Rec for High Speed Copy” (

➡ 90) is set to “On” and you

make a copy, the copy will be made using the picture size selected

in “Aspect for Recording” (

➡ 89) in the Setup menu.

Recording of 16:9 image such as wide broadcasting (28)

Note

If video is copied from another piece of equipment to this unit,

then the video quality will be degraded.

While copying from DV input or executing “Recording via AV2

input” (

➡ 59)

– Copy will stop when timer recording starts.

– Chasing playback, simultaneous rec and play, switching of the

broadcast or input cannot be performed.

Manual recording

HDD

Preparation

Press [DRIVE SELECT] to select the HDD drive.

When recording bilingual programmes, select “M 1” or “M 2” on the

external equipment.

When the output signal from the external equipment is NTSC,

change “TV System” to “NTSC” in the Setup menu (

➡ 92).

1

While

stopped

Press [INPUT SELECT] to select the

input channel for the equipment you

have connected.

e.g., If you have connected to AV2 input terminals, select

“AV2”.

2

Press [REC MODE] to select the

recording mode.

DR, HG, HX, HE, HL, FR mode cannot be selected.

3

Start play on the other equipment.

4

When you want to start recording

Press [* REC].

Recording starts.

To skip unwanted parts

Press [h] to pause recording. (Press again to restart recording.)

To stop recording

Press [g].

Using Flexible Recording (32)

Almost all videos and BD-Video/DVD-Video on sale have

been treated to prevent illegal copying. Any software that

has been treated so, cannot be recorded using this unit.

DMR-BW850GL_en.indb 58

DMR-BW850GL_en.indb 58

2009/04/08 午前 10:01:07

2009/04/08 午前 10:01:07

This manual is related to the following products: