Address layout – Pitney Bowes W680 User Manual
Page 89
Appendix A • Control Panel Menus
Pitney Bowes W660/W680 Operator Guide
A-7
1. Address Layout
Use the Address Layout option to set up the way an address
appears on the printed material. The printable width is limited
to 9.4” from the right side of the mail piece. The printable
height is 15” measured from the bottom edge of the mail piece.
Define the following options from this menu:
A. Distance to Right (Left Margin)
This option sets the start of the address (the left side of the
address) as measured from the right side of the envelope. For #
10 envelopes this should be about 5.5”.
Press the + or – buttons to increase or decrease the Distance to
Right, ( + MORE or – LESS) defined in inches or millimeters.
The left margin is the distance measured from the right edge
of the material to the first printable character. Press the Enter
button to select the desired measurement.