Pitney Bowes W680 - Manual (Page 105)

Appendix A • Control Panel Menus
Pitney Bowes W660/W680 Operator Guide A-23
3. Purge Print Head The purging process clears any clogged ink on the print nozzle.
Often this will return the print quality to a normal level. To
select this option:
1. Press the + or – buttons to scroll through the Setup
Menu options until 3. PURGE TEST HEAD appears
on the LCD panel.
2. Press the Enter button to select this option.
3. To select Purge Print Head cycle, press Enter when the
“Purge Print Head?” message displays.
This option can be enabled by pressing the + button
(YES) or disabled by pressing the – button (NO). If
enabled, the printer will display “Please wait...Ink Jets
being purged”.
4. Press the Menu button to back out of the menu until
the printer displays “OFF LINE”. Then press the On
Line Button to enable the printer.
displays. The printer prints a diagonal line across the
material. If a gap is present within the diagonal line,
the nozzle may be blocked and need to be cleaned.
4. Press the Menu button to back out of the menu until
the printer displays OFF LINE. Then press the On
Line Button to enable the printer.
2. Test Print Head
(continued)
4. Lines Per
Address Use this option to set the number of lines in the address field.
1. Press the + or – buttons to scroll through the Setup
Menu options until 4. LINES PER ADDRESS appears on
the LCD panel.