Pitney Bowes W680 - Manual (Page 73)

Printer Maintenance • 5
Pitney Bowes W660/W680 Operator Guide 5-3
If the right and left exit rollers are misaligned, that is, contact
printed surfaces, they can become contaminated with ink. Use
water to dampen a soft cloth and remove the ink from the rollers.
A film and/or dust can build up on the sensors and cause
misfeeds of the material. Lift the transport door and use com-
pressed air to blow dust from the sensors. Cans of compressed air
are available from many computer supply houses.
Exit Rollers
Sensor
Sensor Location
Periodically wipe the cover and floor assembly (feed deck) with a
soft cotton cloth, dampened with water only. Floor Assembly
and Top Cover