Pitney Bowes W680 - Manual (Page 104)

Appendix A • Control Panel Menus
A-22 Pitney Bowes W660/W680 Operator Guide
2. Test Print Head
The only time you need to turn this mode on is when you are
using long, heavy envelopes. This option increases motor
torque. This option is normally OFF.
To use this option:
1. Press the + or – buttons to scroll through the Setup
Menu options until the 1. HEAVY MEDIA LOAD
appears on the LCD panel.
2. Press the Enter button to select this option.
3. Press the + or – buttons to select A. ON or B. OFF.
4. Press the Enter button to select the desired option.
5. After making your selection, press the Menu button
several times to back out of the Menu, until the printer
displays OFF LINE. Then, press the On Line button to
enable the printer.
Before you select this option, make sure that the material is
loaded in the printer input area so you can print a test pattern.
To use this option:
1. Press the + or – buttons to scroll through the Setup
Menu options until the 2. TEST PRINT HEAD option
appears on the LCD panel.
2. Press the Enter button to select this option.
The LCD will display “Print test pattern?”
3. Press + for Yes to print the test pattern, or press – for No
to cancel.
If you press +, “Please wait...Test pattern is printing”
1. Heavy Media
Mode