Warped lines, Blurred lines (ink “bleeds” from lines), Marks or scratches on glossy paper after printing – PC Concepts 500PS User Manual
Page 94
Printer
Warped Lines
•
The media itself may be warped. This can happen if it has been used or not been stored in the correct environ-
mental conditions.
•
For all environmental specifications, see
Blurred Lines (Ink “Bleeds” from Lines)
•
Perhaps you have adjusted the drying time in the front-panel menu to speed up the printer output. Set “Drying
time” to
“Automatic”.
For details of drying time adjustments, see
Marks or Scratches on Glossy Paper after Printing
Glossy paper may be extremely sensitive to the bin or anything that it comes into contact with directly after
printing. This will depend on the amount of ink printed and the environmental conditions that are present at the
time of printing. Avoid any contact with the paper and handle the print with care until quite some time has elapsed.
NOTE:
Included with HP media is a book “Printer Tips” that includes a section on troubleshooting
paper problems.