PC Concepts 500PS User Manual
Page 134
Printer
Paper mispositioned
The paper is not properly positioned in the printer. Either it is out of
the load line margins or it has moved too much from its previous
position.
Reload the paper following the normal procedure, to solve this
problem. See
Paper not found
Press ENTER to retry
Press CANCEL to abort
During the loading of paper, the printer has detected that no paper
has been loaded.
Either: Press the Enter key to restart the loading procedure;
Or: Press the Cancel key to cancel paper loading.
Paper not present.
Load paper to print calibration
pattern
The paper axis calibration routine has been triggered with out
having paper loaded.
Load paper; see
for details of the routine.
Paper too big to scan the
pattern after printing it
During the paper loading for the Calibration routine, the printer has
detected that the it will not be able to load the later when it will be
needed for scanning. The minimum size required for the print is
65 cm (25 inches) long and 50 cm (20 inches) wide.
Load a smaller sheet that satisfies this minimum requirement.
Front Panel Messages (continued)
Message
Explanation and Action
For more Messages, click on the Next Page button