Image is clipped, Long-axis print is clipped – PC Concepts 500PS User Manual
Page 100
Printer
Image is Clipped
•
This normally indicates a discrepancy between the actual printing area on the loaded media and the printing
area as understood by your software. For general advice on printing areas and page size, see
•
Check the actual printing area for the media size you have loaded (printing area = media size – margins). For
media size and margins, see
•
Check what your software understands to be the printing area (which it may call “printable area” or “imagable
area”). For example, some software applications assume standard printing areas that are larger than those
used in this printer.
•
You may have asked to rotate the page from portrait to landscape on media that is not wide enough, for exam-
ple a D/A1-size page rotated on a D/A1-size roll.
•
If necessary, change the printing area in your software.
•
The file may be too large for the printer’s memory.
Long-Axis Print Is Clipped
•
Does your software support long-axis prints?
•
Have you specified an appropriate media size in your software?
•
There may not be sufficient memory.