Palm T5 - Manual (Page 106)

Tungsten™ T5 Handheld 84
CHAPTER 5 Moving and Managing Info Between Your Handheld and Your Computer
Synchronizing with a cable
0
1
Connect the USB sync cable to
the USB port on the back of your
computer, and then insert the
other end into your handheld.
2
Synchronize your handheld with
your computer:
a. Press the HotSync button on
the USB sync cable.
b. When synchronization is
complete, a message appears
at the top of your handheld
screen, and you can
disconnect your handheld
from the connector.
Done
Tip
If you need help with
synchronizing, see I can’t
synchronize my handheld
with my computer.
Tip
View the HotSync log to
see what applications
were successfully
synchronized and
whether any problems
took place during
synchronization. Go to
Applications on your
handheld and select
HotSync, and then select
Log; or click the HotSync
Manager icon on your
computer and then click
View Log. If any problems
occurred during
synchronization, a
message appears on your
computer screen asking if
you want to view the log.