Printronix LQH-HWTM - Manual (Page 87)

87
3
Bar Codes
Overview
A bar code is a graphic representation of alphanumeric characters. Bar codes
are produced by entering bar code commands in the Create Form mode. The
IGP bar codes are listed in Table 7, with detailed bar code information
provided on the referenced pages. All parameters must be separated by a
semicolon (;) unless noted otherwise. Throughout this chapter, actual
commands required for input are shown exactly as they must be entered,
while all parameters associated with that command are shown in italics.
Optional parameters are enclosed in brackets. Spaces are used only to
visually separate the command parameters, but do not enter these spaces in
your command.