Printronix LQH-HWTM User Manual

Page 255

Text mode
Original mode

User-Defined Set Command (USET)

255

Example

The following example defines User Set 1 to contain the
Multinational font addresses B1 (±), A1 (¡), and BF (¿) at the hex
cell addresses 23, 24, and 25, respectively. Therefore, if

ca = 23

and

fa = B1, each time that cell address 23 is received, it will

select the character located at font address B1 (±).

~USET1
23;B1
24;A1
25;BF
END

User Set 1 now contains the following: the plus or minus sign ±

(B1 hex) in place of the number sign # (23 hex); the upside down
exclamation point ¡ (A1 hex) in place of the dollar sign $ (24 hex);
and the upside down question mark ¿ (BF hex) in place of the
percent sign % (25 hex). To print User Set 1, you must use the
ISET command discussed on page 256.

Table 23. USET-ISET Relationship

USET

corresponds

ISET;

n = 1

n = 24

n = 2

n = 25

n = 3

n = 26

n = 4

n = 27

n = 5

n = 28

n = 6

n = 29

n = 7

n = 30

n = 8

n = 31