Testing a handset – Polycom Mitel Networks 3300 User Manual
Page 40
SpectraLink Corporation
Configuration and Administration—NetLink e340/i640 Wireless Telephone
Mitel Networks 3300 and SX-200 ICP and 5220 IP Phone emulation
PN: 72-1084-02-G.doc
Page 40
8. Testing a Handset
Verify proper registration and operation of each handset by performing the
following tests on each handset in an active wireless area.
1. Power on the handset by pressing
Power On
. You will see a series of messages
displayed as the handset acquires the system. The handset should display the user
extension or dashes if no extension is programmed. Any error messages should
clear.
2. Press the
Start Call
key. The extension number should be replaced by
information from the supported Mitel Networks VoIP solution and you should
hear dial tone. Place a call and listen to the audio quality. End the call by pressing
the
End Call
key.
3. Place a call to the handset and verify ring, answer, clear transmit, and clear
receive audio.
4. Go off-hook and use the
FCN
key to verify the Features list.
5. Go off-hook and use the
LINE
key to verify the Line appearances / Line features
list.
6. Press the
End Call
key. Any line indicators should turn off and the extension
number display will return.