Polycom Mitel Networks 3300 - Manual (Page 28)

SpectraLink Corporation Configuration and Administration—NetLink e340/i640 Wireless Telephone
Mitel Networks 3300 and SX-200 ICP and 5220 IP Phone emulation
PN: 72-1084-02-G.doc Page 28
Ring Cadence The cadence is the rhythm of the ring. It may be set to a pre-
programmed ring cadence or it may be set to obtain its cadence from the Call Agent.
The PBX option is designed to utilize any distinctive rings sent by the Call Agent
while allowing the user to set unique rings for auxiliary applications.
Off
PBX
Continuous
Short Pulse
Long Pulse
OK Up
Off : silent
PBX : Call Agent determines ring cadence (e.g. the Call Agent may send rings that
differentiate between internal and external calls.)
Continuous : rings continually until answered
Short Pulse : rings in short bursts
Long Pulse : rings in long bursts
Ring Tone select from five available tones (scroll to Tone 5 option). The Play
softkey allows the user to preview the tone before selecting. If Ring Cadence is
turned off, the Ring Tone option will not appear on the menu.
Tone 1
Tone 2
Tone 3
Tone 4
Tone 5
OK Play Up
Ring Volume NetLink i640 Wireless Telephone only. The user may select a volume
level by pressing the Up and Down side buttons and then pressing the OK softkey.
The graduated volume bar indicates the levels. This setting may be overridden by
adjusting volume while the handset is ringing.
Vibrate Cadence Vibrate Cadence options are the same as for Ring Cadence
Ring Delay Ring Delay determines how long the vibrate cadence will play before the
audible ring starts. If Ring Cadence and Vibrate Cadence are turned off, the Ring
Delay option will not appear on the menu.
No Delay
5 Second Delay
10 Second Delay
OK UP