Polycom Mitel Networks 3300 - Manual (Page 32)

SpectraLink Corporation Configuration and Administration—NetLink e340/i640 Wireless Telephone
Mitel Networks 3300 and SX-200 ICP and 5220 IP Phone emulation
PN: 72-1084-02-G.doc Page 32
each time it powers on. See NetLink Wireless Telephone Configuration section
for detailed configuration instructions.
6. Power cycle the handset.
7. The MiNET code will now download to the handset. The status bar will
increment fully across the display for each function that is being performed in
the download process. Upon completion of the update process, the handset will
re-boot with the new firmware.
8. If the handset is statically configured, you may now enter the SVP IP address and
RTC address as detailed in the NetLink Wireless Telephone Configuration section
above.
9. Register the handset with the supported Mitel Networks VoIP solution as if it
were a SpectraLink NetLink phone and properly label the handset with the
appropriate extension.
For future software upgrades, simply update the files that are stored on the
TFTP server. Each time the handset is powered up, it will check with the
TFTP server to ensure it has the proper software version.