Polycom Mitel Networks 3300 User Manual
Page 29
SpectraLink Corporation
Configuration and Administration—NetLink e340/i640 Wireless Telephone
Mitel Networks 3300 and SX-200 ICP and 5220 IP Phone emulation
PN: 72-1084-02-G.doc
Page 29
Auxiliary Ring 1 and Ring 2
Auxiliary rings are designed to be utilized by OAI
applications, enabling the user to set a distinctive ring for these applications.
Phone Options
Noise
Mode
Provides options that describe the noise level in your environment.
Changing this mode to
High
or
Severe
adjusts the handset’s microphone and in-ear
speaker volume to account for background noise. Select
Normal
for most office
environments;
High
for moderate background noise; or
Severe
for extremely noisy
conditions. If you use
High
or
Severe
modes in a quiet environment, the person on
the other end of the line may find it difficult to hear your voice.
Key
Tones
Key tones may be turned on or off and determine if tones play when
keys are pressed. Key tones are enabled by default.
Warning
Tones
The handset plays various warning tones such as system up or
down, out of range, etc. These tones may be turned on or off and are enabled by
default.
Display
Contrast
The display may need to be adjusted for different lighting
situations. Contrast may be set by pressing the
Up
and
Down
side buttons until the
desired contrast is displayed and then pressing the
OK
softkey.
Keypad Autolock
The handset may be set to lock the keypad automatically when in
standby mode. The automatic locking function of the keypad may be disabled (the
default) or adjusted for a 5, 10 or 20 second delay before locking.
System Info
Phone IP Addr
Displays the IP address currently assigned to the handset.
Server IP Addr
Displays the IP address of the NetLink SVP Server and the OAI
Server (if installed).
Firmware
Version
displays the software version running the handset. The MAC
address is the hardware identification number and is set at the factory. Three code
numbers correspond to the three files that each version uses.
(MAC address)
(downloader code) (functional code)
(phintl file)
OK
Up
Downloader: pd11gl3.bin
Functional: pd11mtd3.bin
Phintl: pi110001.bin
Identification
permits an alphanumeric entry that will appear on the standby display
under the extension number. Use the alphanumeric entry technique described in the
Admin menu section and enter up to 16 characters.
Mitel Options
This option displays the ports being utilized for receiving data at the
handset.