Paxar 9800 Series - Manual (Page 9)

Installing the Hardware 2-1
I N S T A L L I N G T H E H A R D W A R E
O v e r v i e w
This chapter describes:
♦
how to install a Monarch Print Server in your printer
♦
how to connect a Monarch Print Server to the Ethernet cable
♦ how to restore factory defaults to the print server.
P r i n t S e r v e r I n s t a l l a t i o n
You must use version 6.5 or greater of the Monarch  9840  printer. The Ethernet
print server is an internal option and should be ordered at the time the printer is
ordered.
S e t t i n g U p t h e P r i n t S e r v e r
The Monarch  Print Server (Ethernet) is extremely easy to set up. To use the
Ethernet print server, upper DIP switch 8 must be turned ON. This enables the bi-
directional communication.
Do not plug any cables into the parallel port when using the
Ethernet port.
2
Upper DIP Switches
Ethernet Port
Parallel Port
Serial Port