Paxar 9800 Series - Manual (Page 70)

A-4 Command Summary
U n p r o t e c t Allows system manager to temporarily
access SET commands when remote
console is in protected mode (See SET
P R O T E C T I O N
command). The SET
D E F A U L T command can be used to
permanently disable the protected mode.
Z e r o Zeroes statistical counts
N e t B E U I / N E T B I O S I P C o m m a n d s
C l e a r N E T B e u i D o m a i n < d o m a i n n a m e > Clears domain name
S E T N E T B e u i [ E N | D I S ] Enables or disables NetBEUI
S E T N E T B i o s D o m a i n < d o m a i n n a m e > Sets NetBEUI or NetBIOS IP domain
name
S E T N E T B i o s I P [ E N | D I S ] Enables or disables NetBIOS IP
S E T N E T B i o s M E T H O D [ A U T O | S T A T I C ] Determines if print server will
automatically attempt to get the IP
address of the primary and secondary
WINS server
SET NETBios Primary aa.bb.cc.dd Manually sets IP address of primary
WINS server
SET NETBios Secondary aa.bb.cc.dd Manually sets IP address of secondary
WINS server
S e t N E T B i o s I P [ E N | D I S ] Enables or disables NetBIOS IP
S e t S e r v i c e < s e r v i c e n a m e > N E T B e u i
[ E N | D I S ]
Enables or disables NetBEUI on service
S h o w N E T B e u i or Show NETBios Shows NetBEUI/NetBIOS IP parameters
N e t W a r e C o m m a n d s
C l e a r N E T W a r e S e r v e r < s e r v e r > Removes specified NetWare file server
from print server access list.
Clear NETWare QServer ON
Removes queue server mode on service
C l e a r S e r v i c e < s e r v i c e n a m e > C o n t e x t Remove NDS context
C l e a r S e r v i c e < s e r v i c e n a m e > T R E E Remove NDS tree
S E T N E T W a r e [ E N | D I S ] Enables/Disables Netware protocol on
print server
S E T N E T W a r e F r a m e
[ 8 0 2 . 2 | 8 0 2 . 3 | E T H | A L | A U | S N A ]
Sets Netware frame type to 802.2, 802.3,
Ethernet II, ALL, AUTO, or SNAP