Paxar 9800 Series - Manual (Page 72)

A-6 Command Summary
S E T I P R a r p n n Sets procedure used by print server when
obtaining its IP address. By default the IP
address is set along with a default subnet mask
and a router address that is the same as the
address of the load host. By setting nn to 1,
the subnet mask is not set. If nn is set to 2, the
router address is not set. If nn is set to 3,
neither the subnet mask nor the router address
is set.
S E T I P R o u t e r a a . b b . c c . d d Sets default router address
S E T I P S u b n e t a a . b b . c c . d d Sets subnet mask
S E T I P T i m e o u t n Sets inactivity timeout (minutes)
S E T I P W i n d o w n n Sets LPD/TCP maximum window size
S E T S e r v i c e < s e r v i c e n a m e > I P
[ E N | D I S ]
Enables or disables TCP/IP jobs on specified
service
S E T S E R V I C E < s e r v i c e n a m e > T C P
n n
Sets TCP port number (>1023) on service
S h o w I P Shows LPD/TCP/TELNET Parameters
S h o w I P A c c e s s Shows IP addresses that are allowed to access
print server