Pantech PG - 3600V - Manual (Page 59)

Call Cost
This function records information on call cost and limits
the call charge to prevent you from exceeding your
subscription charge.
Press the [Menu] Soft key then select 3.Call Logs then
select 7.Call Cost.
The following information is displayed.
•
Last Call Cost: Displays the cost of the last call.
• Total Call Cost: Displays the cost of all calls.
• Clear Logs: If you input your PIN2 password, this
function deletes all call cost logs.
• Max. Cost: Reads or sets the maximum call cost within
the service area:
Read Limit: Reads the maximum number of units.
Set Limit: Sets the maximum number of units.
• Cost Unit: Reads or sets the cost unit for the service
area.
Read Unit: Reads the cost unit value.
Set Unit: Sets the current cost unit value and the cost per unit.
GPRS Info.
This function displays the following information on the
volume of GPRS data transmitted.
Press the [Menu] Soft key then select 3.Call Logs
then select 8.GPRS Info. The following information is
displayed.
Current Info.: Displays the total volume of GPRS data
transmitted in the current session, in Kbytes.
Last Info.: Displays the total volume of GPRS data
transmitted in previous sessions, in Kbytes.
Total Info.: Displays the total volume of GPRS data
transmitted and received, in Kbytes.
Clear Logs: Clears the logs recording how much GPRS
data you have transmitted.
Call Logs Call Logs
58
060425-PG-3600V-EN�‚�¬(00).indd 58 2006.4.27 7:7:56 PM