Pantech PG - 3600V - Manual (Page 52)

• Username: The ID used to sign in to the E-mail server.
• Password: The password used to sign in to the E-mail
server.
• Data Connection: The Internet data connection used to
connect to the E-mail server:
• GPRS: Select this item then press the [Edit] Soft key to
edit the APN Name, User ID, and Password.
• CSD: Select this item then press the [Edit] Soft key to
edit the Dial Number, User ID, Password, and Modem
Type (ISDN or Analog).
• Incoming Server: The POP3 server used to receive
E-mail.
• Outgoing Server: The SMTP server used to send E
mail.
• SMTP Authentication: If set to Yes then the username
and password are used to authenticate your identity
when you send e-mail messages using the SMTP
protocol. Press the [ l ] or [ r ] scroll key to select
either Yes or No.
• Save Message: Specifies whether e-mail messages
are saved in the Sent Box after they are sent. Press the
[ l ] or [ r ] scroll key to select either On or Off.
• Saving Memory: Specifies where received e-mails
are stored. Press the [ l ] or [ r ] scroll key to select
between the following:
Internal Memory: Saves the files, which are attached to
E-mail, in the phone. However, only certain file types can be
saved.
External Memory: Saves the files, which are attached to
E-mail, in the phone memory. In this case, all file types can be
saved in the Attachments folder.
CB Msg.
Before you can receive Cell Broadcast (CB) messages,
you must configure the following settings.
•
Language: Specifies the language of CB messages
your phone will receive.
• Info. Subjects: Specifies the subject of CB messages
your phone will receive:
Standard: Predefined subject list.
Custom: User-defined subject list.
• Receive: Press the [ l ] or [ r ] scroll key to specify
whether or not you want to receive CB messages.
Voice Mail
Before you can access the voice mailbox provided by your
network service provider, you must configure the following
51
Messages Messages
060425-PG-3600V-EN�‚�¬(00).indd 51 2006.4.27 7:7:52 PM