Philips G-CODE 7819901511 - Manual (Page 31)

Playback
30
 You may not be able to play back discs recorded in
other DVD recorders.
 This DVD recorder can only play DVD-Video discs
marked with region code , or all-region discs
which are labeled with the icon
ALL
. If you try to play
discs with different region code(s), a message saying
‘Invalid Region Code’ will appear on screen.
Playback: Step by Step
Follow the steps to start playing back media files. For
some types of files, there are extra features available and
instructions are provided after this section.
Step 1. Place a disc in the DVD recorder
Press OPEN/CLOSE to open the disc tray. Carefully
place the disc on the tray with the label side facing up,
then press OPEN/CLOSE.
Step 2. Start playback
For DVD-Video, VCD/SVCD and audio CD, playback
will start automatically. If not, press PLAY to begin
playback.
For DVD-Video disc, a menu might appear when the disc
is in playback mode.
For video/music/picture files recorded on discs, a
dialogue box will appear. Select the type of the file you are
going to play. If there are no video/music/picture files on
the disc, the related button(s) will be disabled.
Playback_06_01
Step 3. Change the item you want to play
For DVD-Video disc, press  to select, then press
OK. If the titles and chapters are numbered, press number
buttons (0-9) to select a menu item and confirm with OK.
For audio CD, music files, audio files and VCD/SVCD
disc, press  PREV or  NEXT to select your desired
track/file.
For music and video files recorded on discs, you can also
press ALBUM  or ALBUM  to select a folder which
contains the desired file.
For picture files recorded on discs, see ‘Playing
Picture File’.
Step 4. Stop playback
For DVD-Video/VCD/SVCD discs, and video files..
Press  STOP to stop playback at a marked stop.
Press  PLAY to resume playback from a marked stop.
Press  STOP again to bring the playback to a full stop.
For audio CDs and music files, ...
Press STOP to stop playback.
Press PLAY to resume playback.
Step 5. Remove the disc
Press OPEN/CLOSE.
 For DVD-Video discs, you can bring up the DVD
menu by pressing PLAYLIST on the remote control.
 In some cases, the disc recorded on other recorders
need to be finalized before it can be played back on
this DVD recorder.
 This DVD recorder supports music files in .mp3 and
.wma formats.
Programmed Playback for
Audio CD
1. During the playback of an audio CD, press EDIT to
bring up the editing bar.
2. Press number buttons (0-9) to enter the number of track
you would like to play.
3. When completed, press  PLAY to start programmed
playback.
Press  STOP to stop playback.
Press  PLAY to resume playback.
Playing Picture File
1. Follow the general operation in ‘Playback: Step by
Step’ to start the playback of a disc containing picture
files.
2. When playback starts, a tool bar appears on the screen.
Press orto go to previous or next picture. Press 
repeatedly to rotate the picture clockwise or press 
to rotate the picture counterclockwise.