Operating problems, Rn on, see, Appendix b – Palm Tungsten T Handhelds User Manual
Page 259

Operating problems
249
Operating problems
Problem
Solution
I don’t see anything on my
handheld’s screen.
Try each of these in turn:
■
Press an application button to ensure that your handheld is
turned on.
■
Tap the Brightness icon
in the upper-right corner of the
Graffiti
®
writing area. If the Brightness dialog box appears,
adjust the brightness by pressing and holding Up on the
navigator for a few seconds. If this doesn’t work, press and
hold Down on the navigator for a few seconds.
■
If your handheld was exposed to cold, make sure it is at
room temperature.
■
Charge your handheld.
■
Perform a soft reset. If your handheld still doesn’t turn on,
perform a hard reset. See
.
IMPORTANT
With a hard reset, all records and entries stored
in your handheld are erased. Never perform a hard reset
unless a soft reset does not solve your problem. You can
restore any data previously synchronized with your computer
during the next HotSync
®
operation.
I get a warning message
telling me my handheld
memory is full.
■
Purge records from Date Book and To Do List. This deletes
To Do List items and past Date Book events from the
memory of your handheld. See
. You must perform a HotSync operation to
recover the memory.
■
Delete unused memos and records. If necessary, you can
save these records. See
. You
must perform a HotSync operation to recover the memory.
■
If you have installed additional applications on your
handheld, remove them to recover memory. See
My handheld keeps turning
itself off.
Your handheld is designed to turn itself off after a period of
inactivity. This period can be set at 30 seconds or at one, two,
or three minutes. Check the Auto-off after setting on the Power
Preferences screen. See
.