Pioneer Plasma Display Monitor 502MX - Manual (Page 40)

40
Special Installation (Place product upright and flush into wall (embedding in the wall))
A
A
A X (Front of the unit)
✩ Operating Temperature Restrictions
Temperature in space X and Y
A: 0 to 370 mm 0 to 35 °C
Y (Rear of the unit)
3.4.7 Place product upright and flush into wall (embedding in the wall)
Carefully read the following before trying to embed the unit in a wall, and make sure to observe all the limitations
specified below.
Be sure to mount the unit so that twisting, bending, or other deformation of the unit does not exceed 4 mm.
(1) Embedding in walls with space provided behind the unit.
A