Panasonic PT VX400NTU - Manual (Page 67)

Replacement
ENGLISH -
67
Maintenance
Replace the air filter units. 2 )
Put new filters back into the position. Make sure that the filters are fully inserted to the projector. z
Resetting the Filter Counter
J
Be sure to reset the Filter counter after replacing the filter. ( Æ page 63" Filter counter reset")
Attention
Turn off the power before you replace the air filter unit. z
When attaching the air filter unit, make sure that the projector is stable, and work in an environment that is z
safe, even in the event of the air filter unit dropping.
Do not operate the projector with the filters removed. Dust may accumulate on the optical elements z
degrading picture quality.
Do not put anything into the air vents. Doing so may result in malfunction of the projector. z
Do not wash the filters with water or any other liquid matter. Otherwise the filters may be damaged. z
Attaching the Filter Cover to the Projector
J
The supplied filter cover is designed for preventing dust accumulation on the filter when mounting the projector on
the ceiling.
Turn over the projector. 1 )
Remove the filter cover (bottom). 2 ) ( Æ page 66)
Attaching the filter cover to the projector. 3 )
Push the cover as the picture shown. z
Attach the projector to the ceiling mount 4 )
in accordance with the instruction
manuals which come with the ceiling
mount.
Attention
Please keep the filter cover (bottom) for later use. z
If the Projector Mount Base ET-PKV100B is applied, the supplied filter cover is unnecessary. z
To Ceiling Mount
Filter Cover
(supplied)
Projector