Current mode, Clamp, Display area h – Panasonic PT VX400NTU User Manual
Page 47: Display area v, Reset, Mode free, Store, Manual pc adjust, English
Manual PC adjust
ENGLISH -
47
Settings
Current mode
Press ▲▼ to select [Current mode].
1 )
Press ► or the
2 )
to enter the next submenu to show
[
H-sync freq.] and [V-sync freq.] of the
connected computer
.
Clamp
Press ▲▼ to select [Clamp].
1 )
Press the
2 )
the adjustment dialog box.
Press ◄► to adjust the clamp level.
3 )
When the image has dark bars, try this
z
adjustment.
Display area H
Press ▲▼ to select [Display area H].
1 )
Press the
2 )
the adjustment dialog box.
Press ◄► to adjust the horizontal area
3 )
displayed by this projector.
Display area V
Press ▲▼ to select [Display area V].
1 )
Press the
2 )
the dialog box.
Press ◄► to adjust the vertical area
3 )
displayed by this projector.
Reset
To reset the adjusted data, all adjustments will return
to their previous figures.
Press ▲▼ to select [Reset].
1 )
Press the
2 )
A confirmation box appears and then select [Yes].
z
Mode free
Press ▲▼ to select [Mode free].
1 )
Press ► or the
2 )
enter the next submenu.
Move the highlight to the mode that you want to
z
clear and then press the
Store
Press ▲▼ to select [Store].
1 )
Press ► or the
2 )
enter the next submenu.
Move the highlight to one of the Modes 1 to 10
z
in which you want to store, and then press the