Panasonic PT VX400NTU - Manual (Page 19)

ENGLISH -
19
Preparation
About Your Projector
Remote control
* Center part is Button. Outer part is Button.(1) Button Turn the projector off (Æpage 33).(2) Signal Emission indicator Light red while a signal is being sent from the remote control to the projector.(3) Remote control signal emitter
(4) Button Turn the projector on (Æpage 31).(5) Button Execute the setting of Auto setup in the setting menu (Æpage 56). Cancel the playing of the memory viewer function. (Refer to "Operating Instructions - Network operations").(6) button Open or close the On-Screen Menu (Æpage 40).(7)▲▼◄► (VOL-/+) Buttons , Button
Outer part is
Button.
(1) Button
Turn the projector off ( Æ page 33).
(2) Signal Emission indicator
Light red while a signal is being sent from the
remote control to the projector.
(3) Remote control signal emitter
(4) Button
Turn the projector on ( Æ page 31).
(5) Button
Execute the setting of Auto setup in the setting
menu ( Æ page 56).
Cancel the playing of the memory viewer function.
(Refer to "Operating Instructions - Network
operations").
(6)
Open or close the On-Screen Menu ( Æ page 40).
(7)▲▼◄► (VOL-/+) Buttons ,
_ Navigate the MENU display.
_ Adjust the volume level or mute the sound.
(8) Button
Act as the left mouse button for wireless mouse
operation ( Æ page 37).
(9) Number Buttons
Act as number buttons. Use these buttons when
setting the remote control codes ( Æ page 24) or
entering the PIN code numbers ( Æ page 32).
(10) Button
Act as the right mouse button for wireless mouse
operation ( Æ page 37).
(11) Button
Move a pointer of the projector or a pointer for
wireless mouse operation ( Æ page 37).
(12) Button
Operate the information function ( Æ page 64).
(13) Button
Select the image mode ( Æ page 36).
Note
The remote control can be used as a wireless mouse for z
your computer.
Before operating the wireless mouse, connect your z
computer and the projector with a USB cable
( Æ page 37).
When a USB cable is connected to the computer and the z
projector, turn on the projector first, then the computer.
(8), (10), (11), (15) are available when a USB cable is z
connected to the computer and the projector.
(4)
(1)
(5)
(8)
(6)
(3)
(10)
(13)
(7)
(9)
(12)
(2)
(11) *