Digital zoom, Keystone, Ceiling – Panasonic PT VX400NTU User Manual
Page 53: Digital zoom + digital zoom keystone ceiling, Screen digital zoom, English
ENGLISH -
53
Settings
Screen
Digital zoom +
Zoom in the images.
Press ▲▼ to select [Digital zoom +]
1 )
and then press the
The On-Screen Menu disappears and
z
[D. zoom + ]appears.
Press the
2 )
the image size and
press ▲▼ ◄► to
move the image to the top/bottom/left/
right of the screen.
The Panning function can work only when the
z
image is larger than the screen size. A projected
image can be also expanded by pressing the
Digital zoom -
Zoom out the images.
Press ▲▼ to select [Digital zoom -]
1 )
and then press the
The On-Screen Menu disappears and
z
[D. zoom - ]appears.
Press the
2 )
out image size.
The projected image can be also compressed
z
by pressing the
To exit the Digital zoom +/– mode, press any button
except the
buttons.
To return to the previous screen size, select a screen
size from the Screen Size Adjustment Menu or select
an input source from the “Input Source Selection
Menu” (
Æ
page 43) again, or adjust the screen size
with the
Note
When input computer signal to the projector, this function
z
will be available.
[Digital zoom +/-] cannot be selected when [True] is
z
selected in the Screen menu
.
[Digital zoom -] cannot be selected when [Custom] is
z
selected in the Screen menu.
[Digital zoom +/–] are disabled and cannot be displayed
z
when [480i], [576i], [480p], [576p], [720p], [1035i] or
[1080i] is selected in the PC System Menu
(
Æ
page 44).
When [Digital zoom +/–] functions are disabled,
z
mark
will appear.
Keystone
This function is used to adjust keystone distortion of
the projected image.
Press ▲▼ to select [Keystone].
1 )
Press ► or the
2 )
Press ▲▼ to choose the item you
3 )
want to adjust.
Standard
Adjust the Horizontal/Vertical
keystone distortion of the projected
image.
Corner
correction
Adjust the corner distortion of the
projected image.
Corner
pattern
Choose a Corner pattern mode
among Red, White, Blue, and Off.
Store
To store or reset the keystone
correction.
Store
Keep the keystone correction
even when the AC power cord is
unplugged.
Reset
Release the keystone correction
when turn off the projector.
Note
For details, see “Using the KEYSTONE button” of "Basic
z
operation by using the remote control"
(
Æ
page 37
)
.
Ceiling
This function is used to project the image from a
ceiling-mounted projector.
Press ▲▼ to select [Ceiling] and then
1 )
press the
2 )
When this function is set to [On], the picture will
z
be top/bottom and left/right reversed.
The following items is the
submenu of [Store].