Philips DV900VHS - Manual (Page 69)

RECORD
1 2 3
5 4 6
7 8 9
0
DVD/VCR
OUTPUT MEMORY
TIMER SET
DISPLAY
+10 SPEED
SETUP
TITLE MENU
MODE AUDIO ANGLE SUB TITLE
ENTER
SEARCH MODE
TIME SEARCH STATUS/EXIT
VCR/TV
VCR DVD
RETURN
CLEAR
CHANNEL
PLAY
STOP
PAUSE
SLOW
REW F.FWD
REPEAT
A B
POWER
SKIP
Audio Settings (cont’d) 69
4
To change the PCM, DOLBY DIGITAL, or DTS settings,
press the corresponding Number button to select the
desired item, then press the Number button to choose
the setting (i.e. ON or OFF).
5
4
5
Press the SETUP button to remove the menu.
SETUP/AUDIO
PCM
1. 48kHz
2. 96kHz
• Audio signals are converted to
48 kHz/16 bit signals when playing
a DVD recorded with high sound quality
(48 kHz/20 bit/24 bit, 96 kHz).
• Sound is reproduced at 96 kHz if a DVD
is recorded with high sound quality. If you
are playing 48 kHz discs or if 4:3 LETTER
BOX is selected, sound is reproduced
at 48 kHz.
Enter, Back Exit
SETUP/AUDIO
DOLBY DIGITAL
1. OFF
2. ON
• Select ON when a Dolby Digital decoder is used.
Enter, Back Exit
SETUP/AUDIO
DTS
1. OFF
2. ON
• Select ON when a DTS decoder is used.
Enter, Back Exit