Specific time playback 57, Starting playback at a specific disc time, Dvd audio cd – Philips DV900VHS User Manual
Page 57: Helpful hint
RECORD
1
2
3
5
4
6
7
8
9
0
DVD/VCR
OUTPUT
MEMORY
TIMER SET
DISPLAY
+10
SPEED
SETUP
TITLE
MENU
MODE
AUDIO
ANGLE
SUB TITLE
ENTER
SEARCH MODE
TIME SEARCH
STATUS/EXIT
VCR/TV
VCR
DVD
RETURN
CLEAR
CHANNEL
PLAY
STOP
PAUSE
SLOW
REW
F.FWD
REPEAT
A B
POWER
SKIP
1
Press the DVD button, then press the SEARCH MODE
button repeatedly (three times for DVDs or two times for
Audio CDs).
2
Use the Number buttons to enter the Disc time at which
you want playback to begin.
●
Example: 1 hour, 23 minutes and 30 seconds
1 → +10 → +10 → 3 → +10 → +10 → +10 → 0
●
To enter zero, press the Number 0 (zero) button or press the
B
button.
●
Make sure the time you enter is within the total time of the
Disc. If it is not, you will have to enter a different time.
●
If you make a mistake, press the B button repeatedly until you
reach the item you need to correct (hour, minute, or second),
then enter the correct information.
3
Within 30 seconds, press the PLAY button. Playback will
start at the time that you specified.
Starting Playback at a Specific Disc Time
Specific Time Playback 57
DVD
AUDIO CD
2
3
• Specific time playback is not avail-
able with some discs or if MEMO-
RY OFF is activated for a DVD.
Details are on page 52.
Helpful Hint
●
Before you begin, place the DVD/VCR in DVD mode.
Press the DVD/VCR OUTPUT button so that the red DVD light
appears on the front of the DVD/VCR.
SEARCH/TIME
TOTAL TIME: 1h23m45s
TIME [ _h_ _m_ _s ]
Exit
Start
SEARCH/TIME
TOTAL TIME: 1h23m45s
TIME [1h05m30s]
Start Exit
1