Philips DV900VHS - Manual (Page 47)

RECORD
1 2 3
5 4 6
7 8 9
0
DVD/VCR
OUTPUT MEMORY
TIMER SET
DISPLAY
+10 SPEED
SETUP
TITLE MENU
MODE AUDIO ANGLE SUB TITLE
ENTER
SEARCH MODE
TIME SEARCH STATUS/EXIT
VCR/TV
VCR DVD
RETURN
CLEAR
CHANNEL
PLAY
STOP
PAUSE
SLOW
REW F.FWD
REPEAT
A B
POWER
SKIP
6
MTS (Multi-Channel Television Sound) System (cont’d) 47
● Before you begin, place the DVD/VCR in VCR mode. Press the
DVD/VCR OUTPUT button so that the green VCR light appears
on the front of the DVD/VCR. Press the VCR/TV button so that
the VCR/TV light appears on the front of the DVD/VCR.
1
Press the VCR button, then press the MENU button.
2
Press the PLAY button or the STOP button to select
TUNER SET UP, then press the F.FWD button.
3
Press the PLAY button or the STOP button to select TV
STEREO or 2ND AUDIO. Then, press the F.FWD
button. ON will appear to the right of your selection.
4
Press the DISPLAY/STATUS/EXIT button.
5
To record, select the channel to be recorded using the
CHANNEL o/p buttons, then go to step 6.
6
Press the RECORD button to start recording.
SELECT op CHOOSE B
→
AUTO PROGRAMMING
ADD/DELETE CH
CH MEMORY REVIEW
TV STEREO
ON
2ND AUDIO
TO END PUSH EXIT
SELECT op CHOOSE B
AUTO PROGRAMMING
ADD/DELETE CH
CH MEMORY REVIEW
TV STEREO
→ 2ND AUDIO ON
TO END PUSH EXIT
• You can only receive and record in
stereo or second audio programs
that are broadcast in stereo or sec-
ond audio. You can only play in
stereo or second audio tapes that
were recorded in stereo or second
audio. Please see page 46 to deter-
mine if the program you want to
watch/record is being broadcast in
stereo or second audio.
• If you select second audio when sec-
ond audio is not available, the
DVD/VCR will record normal audio.
Helpful Hints
1
2-3
4
5
1
SELECT op CHOOSE B
→ PROGRAM
VCR SET UP
TUNER SET UP
SET CLOCK
TO END PUSH EXIT
VCR