Philips DV900VHS - Manual (Page 34)

RECORD
1 2 3
5 4 6
7 8 9
0
DVD/VCR
OUTPUT MEMORY
TIMER SET
DISPLAY
+10 SPEED
SETUP
TITLE MENU
MODE AUDIO ANGLE SUB TITLE
ENTER
SEARCH MODE
TIME SEARCH STATUS/EXIT
VCR/TV
VCR DVD
RETURN
CLEAR
CHANNEL
PLAY
STOP
PAUSE
SLOW
REW F.FWD
REPEAT
A B
POWER
SKIP
1
Press the VCR button, then press the RECORD button to
start a recording of the current TV channel. Details are on
page 33.
34 Recording One Channel/Watching Another
• If you use a Cable Box or Direct
Broadcast System hookup, you
may not be able to watch one
channel while recording another.
See pages 10-11 for details.
Helpful Hint
2
Press the VCR/TV button to put the DVD/VCR in TV
position. The VCR/TV light will disappear from the front of the
DVD/VCR.
3
Use the TV remote control to select the channel you
want to watch at the TV.
4
To return to the channel being recorded, use the TV
remote control to select channel 03 or 04 at the TV (the
channel to which the CH3/CH4 switch on the back of the
DVD/VCR is set). Or, if you connected the DVD/VCR to the TV
using audio and video cables, select the correct audio and video in
channel at the TV. Details are on page 12.
5
Press the VCR/TV button on the DVD/VCR remote con-
trol to put the DVD/VCR in VCR position. The VCR/TV light
will appear on the front of the DVD/VCR. The channel being
recorded will appear on the TV screen.
6
Press the STOP button to stop the recording.
2&5
1
6
3
4 Select the channel you want to
watch at the TV.
Select channel 03 or 04 at the
TV.
VCR
● Before you begin, place the DVD/VCR in VCR mode. Press the
DVD/VCR OUTPUT button so that the green VCR light appears
on the front of the DVD/VCR. Press the VCR/TV button so that
the VCR/TV light appears on the front of the DVD/VCR.