Philips DV900VHS - Manual (Page 67)

RECORD
1 2 3
5 4 6
7 8 9
0
DVD/VCR
OUTPUT MEMORY
TIMER SET
DISPLAY
+10 SPEED
SETUP
TITLE MENU
MODE AUDIO ANGLE SUB TITLE
ENTER
SEARCH MODE
TIME SEARCH STATUS/EXIT
VCR/TV
VCR DVD
RETURN
CLEAR
CHANNEL
PLAY
STOP
PAUSE
SLOW
REW F.FWD
REPEAT
A B
POWER
SKIP
• Write down the password in case
you forget it.
• To erase the old password, press
the POWER button to turn off the
DVD/VCR. Then, press and hold the
DVD STOP button on the DVD/VCR
while pressing the POWER button
on the DVD/VCR to turn on the
power again. When “HELLO”
appears on the display panel, you
may release the DVD STOP button.
Follow the steps on this page to set
the password that you desire.
Helpful Hints
Parental Lock Password 67
1
While playback is stopped, press the DVD button, then
press the SETUP button. The setup screen will appear.
2
Press the Number 4 button to select LOCK.
The SETUP/LOCK menu will appear.
3
Press the Number buttons to enter the 4-digit password.
● When doing this for the first time, enter any 4 digits. That num-
ber will be the password until you change it.
1
2
4
6
3,5
4
Press the Number 2 button to select CHANGE PASS-
WORD. The first space in the PASSWORD will start flashing.
5
Press the Number buttons to enter your new password.
6
Press the RETURN button twice to remove the menu.
You can change the password as often as you like. To do so, follow
these steps.
● Before you begin, place the DVD/VCR in DVD mode.
Press the DVD/VCR OUTPUT button so that the red DVD light
appears on the front of the DVD/VCR.
SETUP
1. LANGUAGE
2. VIDEO
3. AUDIO
4. LOCK
5. OTHERS
Enter / Exit
SETUP/LOCK
PASSWORD [ _ _ _ _ ]
1. LEVEL [NONE]
2. CHANGE PASSWORD
Enter, Back
SETUP/LOCK
PASSWORD [ ]
1. LEVEL [NONE]
2. CHANGE PASSWORD
Enter, Back
1