beautypg.com

Timer recording (cont’d) 37, Instructions continue on page 38, Helpful hints – Philips DV900VHS User Manual

Page 37

background image

RECORD

1

2

3

5

4

6

7

8

9

0

DVD/VCR

OUTPUT

MEMORY

TIMER SET

DISPLAY

+10

SPEED

SETUP

TITLE

MENU

MODE

AUDIO

ANGLE

SUB TITLE

ENTER

SEARCH MODE

TIME SEARCH

STATUS/EXIT

VCR/TV

VCR

DVD

RETURN

CLEAR

CHANNEL

PLAY

STOP

PAUSE

SLOW

REW

F.FWD

REPEAT

A B

POWER

SKIP

ONE TIME PROGRAM

PROGRAM

1

CHANNEL

10

TIME ON

– – : – –

TO CORRECT PUSH CLEAR
TO END PUSH EXIT

6

Press two Number buttons for the hour you want the
recording to begin. Press two Number buttons for the
minute you want the recording to begin. Press 1 for AM or
2 for PM.
For example, for 9:30 PM, press 09, 30, 2.

ONE TIME PROGRAM

PROGRAM

1

CHANNEL

10

TIME ON

09:30 PM

TIME OFF

– – : – –

TO CORRECT PUSH CLEAR
TO END PUSH EXIT

Timer Recording (cont’d) 37

4

Use the Number buttons (1-8) to select a slot in which to
store the timer recording.
There are eight slots. Numbers for
open slots will flash on the screen.
NOTE: If you enter a number for a slot that has already been used to store
a timer recording, PREVIOUSLY SET PROGRAM will appear on the screen
briefly. Information about the program in that slot will appear on the screen.
If this happens, press the DISPLAY/STATUS/EXIT button, then select another
number.

5

Use the Number buttons to enter the TV channel you want
to record.

Cable Users, enter channel numbers as a two-digit number for the
quickest results. For example, to select channel 6, press 0,6. If you
only press the Number 6 button, channel 6 will be selected after a
brief delay.

There also may be a brief delay when you select channels

10, 11, and 12.

If you want to select channels 100 and above, enter

channel numbers as a three-digit number. For example, to select
channel 117, press 1, 1, 7.

Antenna Users, enter channel numbers as a two-digit number for
the quickest results. For example, to select channel 5, press 0,5. If
you only press the Number 5 button, channel 5 will be selected
after a brief delay. You may only select channels 2-69.

If you are recording from line input, press 0,0 to select AV REAR.

If you are using a Cable Box/DBS, select the Cable Box/DBS out-
put channel (03 or 04). Set the Cable Box/DBS to the channel you
want to record. Leave the Cable Box/DBS on for the timer
recording. Details are on page 10.

7

Follow the instructions in step 6 to enter the recording’s
stop time.
(AM or PM will be set automatically.)

Instructions continue on page 38.

4-7

• Entries that do not match the

DVD/VCR’s clock or calendar will
cause a question mark to appear
on the screen.

• If you are recording from line input,

connect the audio and video cables
to the AUDIO IN and VIDEO IN
jacks on the back of the DVD/VCR.
(Please see illustration on page 40.)

Helpful Hints

This manual is related to the following products: