Philips DV900VHS - Manual (Page 21)

RECORD
1 2 3
5 4 6
7 8 9
0
DVD/VCR
OUTPUT MEMORY
TIMER SET
DISPLAY
+10 SPEED
SETUP
TITLE MENU
MODE AUDIO ANGLE SUB TITLE
ENTER
SEARCH MODE
TIME SEARCH STATUS/EXIT
VCR/TV
VCR DVD
RETURN
CLEAR
CHANNEL
PLAY
STOP
PAUSE
SLOW
REW F.FWD
REPEAT
A B
POWER
SKIP
1
Press the VCR button, then press the MENU button.
2
Press the PLAY button or the STOP button to select SET
CLOCK, then press the F.FWD button.
4
Press the DISPLAY/STATUS/EXIT button.
SET CLOCK
→ SET CLOCK
DAYLIGHT SVG TIME [ON]
SELECT op CHOOSE B
TO END PUSH EXIT
SET CLOCK
SET CLOCK
→ DAYLIGHT SVG TIME [ON]
SELECT op CHOOSE B
TO END PUSH EXIT
SELECT op CHOOSE B
→ PROGRAM
VCR SET UP
TUNER SET UP
SET CLOCK
TO END PUSH EXIT
Daylight-Savings Time 21
You may program the DVD/VCR so the VCR clock will automati-
cally move forward one hour in April and turn back one hour in
October. Daylight-Savings Time is set to ON when you receive
your DVD/VCR. Turn Daylight-Savings Time ON or OFF by fol-
lowing the steps below. Before you begin:
● Make sure the clock is set.
● Before you begin, place the DVD/VCR in VCR mode. Press the
DVD/VCR OUTPUT button so that the green VCR light appears
on the front of the DVD/VCR. Press the VCR/TV button so that
the VCR/TV light appears on the front of the DVD/VCR.
3
Press the PLAY button or the STOP button to select
DAYLIGHT SVG TIME. Then, press the F.FWD button so
that OFF (or ON) appears beside DAYLIGHT SVG TIME.
2-3
4
1
1