Panasonic AG-AC160AEN - Manual (Page 96)

96
[CARD FUNCTIONS] screen
Item
Display
mode
Description of settings
[CARD
FORMAT]
Formats memory card.
[SLOT1]:
Formats the memory card inserted in slot 1.
[SLOT2]: Formats the memory card inserted in slot 2.
[NO]: Returns to the previous screen.
[CARD
STATUS]
Displays the memory card status.
[SLOT1]:
Displays information about the memory card inserted in slot 1.
[SLOT2]: Displays information about the memory card inserted in slot 2.
[NO]: Returns to the previous screen.
[CLIP
PROPERTY]
Displays information about the selected clip.
[YES]:
Displays clip information.
[NO]: Returns to the previous screen.
This can also be displayed using the button.
is the factory default mode.
[USER FILE] screen
Item
Display
mode
Description of settings
[CARD READ] Reads the user files saved on the memory card.
[SLOT1]:
Reads user files from the memory card inserted in slot 1.
[SLOT2]: Reads user files from the memory card inserted in slot 2.
[NO]: Returns to the previous screen.
• When reading the user files with different system frequency, change the
system frequency on the camera in advance.
[CARD WRITE] Saves user files on the memory card. You can also add a title to the saved files.
[SLOT1]:
Saves user file on the memory card inserted in slot 1.
[SLOT2]: Saves user file on the memory card inserted in slot 2.
[NO]: Returns to the previous screen.
[LOAD/SAVE/
INIT]
[LOAD]: Loads the settings in a previously stored user file.
[SAVE]: Saves the updated user file settings.
[INIT]: Returns the settings in the user file to the factory settings.
[NO]: Returns to the previous screen.
• After performing [LOAD] or [INIT], turn POWER/MODE switch of the camera
OFF and then ON again to enable the new settings.
• When [INIT] is executed, the setting value of the scene file, time code, the
[TIME ZONE] item, the [CLOCK SET] item, and the [TIME ZONE] item remain
unchanged.
is the factory default mode.