Panasonic AG-AC160AEN - Manual (Page 70)

70
TV/Monitor
Only the output signals from the camera are shown.
TV/Monitor
Audio pin cable (optional)
White: CH1(LCH) audio
Red: CH2(RCH) audio
Connect the
one that
matches the
terminal of
TV/monitor
Video pin cable
(optional)
BNC cable
(optional)
HDMI cable
(optional)
„ When outputting video and audio signals from the camera to an external device, connect to the
input terminals of the external device.
• Use an HDMI cable (optional) with double-shield or higher.
• It is recommended that you use an HDMI cable manufactured by Panasonic.
• This camera is not compatible with VIERA Link.
• Use a BNC cable (optional) with double-shield that is equivalent to 5C-FB to connect to
terminal.
„ Limitations of image output
• When using output, the LCD monitor and the viewfinder cannot be displayed simultaneously.
In order to display them simultaneously, set the [SDI OUT] item on the setup menu [AV OUT SETUP]
screen to [OFF]. When the [EVF MODE] item on the setup menu [DISPLAY SETUP] screen is set to
[AUTO], the viewfinder display disappears upon opening/closing of the LCD monitor.
• No and will be output when the [REC FORMAT] item in the [RECORDING
SETUP] screen is set to [PH 1080/24P], and the [SDI 24PsF] item in the [AV OUT SETUP] screen is set
to [ON].
• Some displays, such as time code display and audio level meter display may not be visible on the videos
output from the output terminal.