Volume adjustment during shooting, Shot mark function, Index recording (avchd mode only) – Panasonic AG-AC160AEN User Manual
Page 29: Last clip] function
29
Shooting
Volume adjustment during shooting
AUDIO MON/ADV
Adjusting the volume
When monitoring sound with headphones while
shooting, volume can be adjusted with the
•
Adjusting the input sound level (Page 43).
•
The adjusted sound level is remembered when
power is switched off by turning the POWER/
MODE switch
Shot mark function
The mark attached to the thumbnails of clips is
called a shot mark. On the thumbnail screen, only
clips with shot marks attached can be selected and
displayed/played back.
During shooting, when the USER button assigned
to the [SHOT MARK] function is pressed, [MARK
ON] is displayed on the LCD monitor and the
viewfinder, and a shot mark is set on the thumbnail
of the clip being shot. Press the button again to
release it.
Also, shot marks can be set/released by performed
the thumbnail operations of the clips. (Page 57)
However, shot marks cannot be set/released while
playing back.
•
When shotmarks cannot be set/released,
[INVALID] is displayed.
Index recording (AVCHD mode only)
This is a function that adds indexes to image points
in a clip while shooting or playing back.
When the USER button assigned to the [INDEX]
function is pressed during shooting, an index signal
is recorded at that point. (Page 87)
It is also possible to add indexes during playback,
or to display/play back only clips with indexes.
(Page 60)
• A maximum 100 indexes can be recorded to a
single clip.
• When exceeding 100 indexes, even though the
attachment operation is performed, [INVALID]
is displayed and an index cannot be added.
• When continuously adding indexes, do so at
intervals of one second or more. Even if the
operation is performed continuously within
one second, only the first operation will be
valid.
[LAST CLIP] function
When [LAST CLIP] is assigned to a USER button,
the last recorded clip can be deleted by pressing
the button.
When the USER button assigned to [LAST CLIP] is
pressed, [YES]/[NO] is displayed on the screen.
Select [YES] to delete the last recorded clip.
•
Select [NO] not to delete the clip.
•
You cannot delete clips if the following operations
are performed after shooting.
- When switched to
- When changing the recording format
- When connecting to a computer using a USB
cable
- When powering off the camera
- When opening the memory card slot cover
•
When in SIMUL REC mode the function does not
operate.