Panasonic AG-AC160AEN - Manual (Page 84)

84
Item
Display
mode
Description of settings
[DETAIL
LEVEL]
Adjusts the level of the image outline correction (in the horizontal and vertical
directions).
[-7] … [0] … [+7]
[V DETAIL
LEVEL]
Adjusts the level of outline correction in the vertical direction.
[-7] … [0] … [+7]
[DETAIL
CORING]
Adjusts the level of noise reduction of the detail signal.
Set to – for a clearer image, but noise increases slightly.
Set to + to reduce noise.
[-7] … [0] … [+7]
[CHROMA
LEVEL]
Adjusts the chroma level.
[-7] … [0] … [+7]
[CHROMA
PHASE]
Adjusts the chroma phase.
[-7] … [0] … [+7]
[COLOR TEMP
Ach]
Make fine adjustments to the color temperature (after white balance Ach
adjustment).
[-7] … [0] … [+7]
[COLOR TEMP
Bch]
Make fine adjustments to the color temperature (after white balance Bch
adjustment).
[-7] … [0] … [+7]
[MASTER PED] Adjusts the master pedestal (black level of the image) as the basis for images.
[-15] … [0] … [+15]
[A.IRIS LEVEL] Sets the desired AUTO IRIS level.
[-6] … [0] … [+6]
[DRS] Selects the [DRS] (dynamic range stretcher) function.
[ON]: Enables the [DRS] function.
[OFF]: Disables the [DRS] function.
• If you assign the [DRS] function to the USER button, pressing the USER
button switches it ON/OFF.
[DRS EFFECT] Selects the level of the [DRS] (dynamic range stretcher) function.
It enables the dynamic range to be expanded by compressing the level of the
video signals in the high-brightness areas where overexposure results during
normal shooting.
[1], [2], [3]
• The higher the number of the setting, the higher the compression level of the
high-brightness areas.
is the factory default mode for the dial .